close
Combined Shape

products

back to product group

VSH Shurjoint quick install rigid coupling FF 141.3 galvanized UNC

VSH Shurjoint quick install rigid coupling FF 141.3 galvanized UNC

10M070055010

type M07T

The VSH Shurjoint Model M07 is a ready to install rigid coupling for general piping applications where rigidity is required. The M07 includes two identical housing segments and a fully constrained wedge. Proper installation requires the tightening of only one bolt/nut. As this bolt/nut is tightened, the wedge applies uniform compression to the gasket. The hinge bolt/nut is factory pre-set and requires no adjustment.

  • 1-bolt design: super fast installation
  • patent pending wedge design
  • applications include valve connections, mechanical rooms, risers and long straight runs.

applications

heating cooling compressed air vacuum

solutions

building installations industry

characteristics

color silver
materials cast iron (ASTM A536 65-45-12)
finishing galvanised
manufacturer Shurjoint
shape straight (0º)
connection type groove (coupling)
sealing NBR (Nitrile)

product info

item VSH Shurjoint quick install rigid coupling FF 141.3 galvanized UNC
item number 10M070055010
product number 10M070055010
item group M07T - VSH Shurjoint quick install rigid coupling (2 x groove), NBR gasket
size 141.3 (DN125) galvanized UNC
weight 3.5 kg
dimensions 54x250x171

general

product group fittings (demountable)
ETIM class EC003024 Fitting with 2 connections
country of origin Taiwan
brand VSH
series Shurjoint
type M07T

technical

max operating pressure liquid 52 bar
min. medium temperature -29 °C
max medium temperature 82 °C
label value
d1 141.3
DN1 DN125
l1 27
d2 141.3
DN2 DN125
l2 27
see above for the diagram with these dimensions.
label value
ETIM class EC003024 Fitting with 2 connections
Material connection 1 Cast iron
Surface protection connection 1 Galvanic/electrolytic zinc plated
Material connection 2 Cast iron
Surface protection connection 2 Galvanic/electrolytic zinc plated
Shape Straight
Model 2-part
Bend angle
Reducing No
Eccentric No
System specific Yes
Nominal diameter connection 1 DN 125
Outer pipe diameter connection 1 141.3mm
Outer pipe diameter connection 1 (imperial) 5.56"
Connection 1 Ribbing groove (groove coupling)
Nominal diameter connection 2 DN 125
Outer pipe diameter connection 2 141.3mm
Outer pipe diameter connection 2 (imperial) 5.56"
Connection 2 Ribbing groove (groove coupling)
Main colour fitting Grey
Material sealing NBR (nitrile rubber)
With buffer stud No
Length 54mm
Length of connection 1 27mm
Length of connection 1 (imperial) 1.06"
Length of connection 2 27mm
Length of connection 2 (imperial) 1.06"
Max. operating pressure at 20 °C 52bar
Max. operating pressure at 20 °C (imperial) 754.2psi
With sealing rings/gaskets No
Capped No
With connection indicator No
With drain valve No
With de-aerator No
FM quality mark No
LPCB quality mark No
ULC quality mark No
UL quality mark No
VdS quality mark No
DVGW quality mark for gas No
DVGW quality mark for water No
KIWA certified No
Gastec QA mark No
KOMO certified No